Category Archives: Android

Android Phone as Server

Why am I showing you a picture of a cracked-screen phone?

Linux on Android PhoneWell because this particular phone is a bust Oukitel K10000, the phone with the world’s longest-lasting battery and an excellent workhorse. My friend Aidan gave me this (rather than chucking it away) some time ago and it has been sitting doing nothing. All that is wrong with it is a cracked (and exceedingly dangerous on the fingers) screen. I’ll bet I’m not the only one with such a phone lying around wasting space.

Well, as of yesterday, it is a Debian server with all my usual stuff going on quietly in the background – with the screen normally off – running freezing cold and hopefully being super reliable.

This is an experiment only – beware – if your phone or tablet dies it is your problem….  oh and your Android phone/tablet needs to be ROOTED. 

Imagine turning your old, dust-covered phone into a sleek, battery backed-up server with unfeasibly long backup time, immunity to any mains spikes, a silent, fast Debian base for all the stuff in my script – which includes Node-Red, Apache/PHP, SQLITE (+ PHPLiteAdmin), MQTT, MC, Ha-Bridge and more!  If you’ve been following this blog you’ll know about the script.

So this article applies to ROOTED Android phones and we’ve only tested around Android 5.0 onwards.  In my case I rooted the phone with KingRoot (note, NOT the one in the PlayStore which is a con – avoid it - but the one at ) – please note that rooting phones is beyond the scope of this article and if you are not confortable with this you should not do it. There are a lot of links out there on the subject and many of them are fraudulent.

tmpCD52There is an APP in the Play Store called Linux Deploy. It is also on GitHub. Beware that this is essentially undocumented unless you are Russian – so please don’t ask how you can use your phone’s GPS or Sound from Debian – not a clue!

You should have a modern-ish WiFi enabled (or hardwired if you like) Android phone or tablet with at least 16GB of internal FLASH (which should give you 10GB working space).   If you only have 8GB that will leave you only 2GB which - really – isn’t enough.

Getting Debian 8 on the phone:  After ensuring your phone/tablet is rooted, Install the App.

Linux on Android PhoneIn the app, on the top LEFT menu – find  REPOSITORIES and select Debian 8 for ARM.

On the bottom right is a drop down – you should go in there and select INSTALLATION TYPE – directory (OR FILE with a reasonable file size limit – say 5GB – the 2GB default will NOT work). Change the user to “pi” with suitable password in the same menu. TICK for allowing initialisation – and use of SSH server. Also where you see INIT SYSTEM change that to sysv. 

Then TOP RIGHT menu  - INSTALL – that might take some time – top right again CONFIGURE – then bottom menu START – and you should have a working Linux you can get into with for example WINSCP for that “pi” user. The IP address is clearly shown in the App.

I suggest not going further until you are comfortable with the above – took me several attempts because I didn’t follow the above exactly (well, and Antonio and I were learning at the same time).

Running the script: Via WinSCP or similar, put the script into the pi directory – changing permissions as normal - run the script – and ensure PHONE is selected – it isn’t by default. Come back after lunch. The script will no doubt suggest a reboot. Instead, hit the STOP button on the bottom of the phone screen – wait for it complete, hit the START button – wait – and you should now have everything in the script running!

Now – I’m using this to run my script – but I’m thinking you COULD use it to serve files etc. – I’ve not tried this but I’m guessing it would be easy to access an SD card…. and make that a folder…. hmmm.

Anyway, it is now the day after I installed all this – the phone is sitting there “off” and unlike my FriendlyArm board with it’s whirling fan, is sitting silently and freezing cold yet ran the script much faster than any of my SBCs – around 40 minutes.

K10000 running Debian 8No guarantees as there just isn’t enough info about Linux Deploy out there (unless you find/translate some) – but it does seem to work well now that we’ve made sufficient alterations to the script to take this particular setup into account. A fun project, to be sure. Now, I know this is a not a fair comparison and tomorrow we might come back and say … no good (for whatever reason).. but at £107 for that particular phone… compare – how much would it costs for a Raspberry Pi 3, uninterruptable power supply able to keep the phone going for something like a couple of days with no power, a high-def touch screen, a solid case for the whole thing.. indeed ,it might be possible to use a cheap tablet…  I was looking on Ebay – 16GB Android tablet – perfectly working except for missing buttons and cracked digitiser – around £10

One thing to note – I’ve turned rsyslog messages off – it was spitting out all sorts of unwanted helpful messages when you changed brilliance on the phone or disconnected the USB etc –REALLY annoying.. If you feel you need logging on -

sudo service rsyslog start

That will stay on until the next stop-start…

Node-Red running on a K10000 phoneSuch a shame it isn’t clear how to access some of the peripherals like audio. But who knows – someone reading this article may already have solved such challenges.

Please note: the pretty colours on the right do not come as standard. Click images to see larger versions.

This is really starting to look GOOD!!!!

Revelation: I’ve now taken on-board ideas from others and thanks for that – both people in here and on Google+ – most of the other solutions are longwinded and need other packaged  so up to now Linux Deploy – I’m now installing on my old Nexus 7 2012 UTTERLY SUCCESSFULLY (though not the fastest kid on the block) ( after rooting it with the Nexus toolkit ) - using Linux Deploy (which is completely self-contained and offers full root access – is looking the best). The ONLY thing you can’t do is use the Android peripherals – because of lack of UK info but this morning I figured it all out. 

We’ve also tested this one OnePlus One (model BACON) and a Xiaomi Redmi 3 model IDO). The K10000 has now been up for several days.

Ok, bear with me – you have Node-Red on Linux – and MQTT. So, you run Tasker on the phone (in the Android section) with MQTT – and now you have access to and control of all of the Android facilities that TASKER can handle (i.e. just about the lot) from within the Debian environment. Doddle.. now all I need is some time!!