Tag Archives: Home Control 2016 Additions

More Home Control 2016 Updates

As of version 1.5.61 of the Home Control 2016 code,  I’ve now expanded the {debug} command considerably, added new Hitachi display commands and introduced a new MQTT topic called “otacomplete”. Here incidentally is the Bitbucket repository for all of this.

The Hitachi commands are documented in the manual.  As for the new MQTT topic, this is so that, should you choose to OTA update a unit remotely, you have some means to know asap that it is working.  In the event of an OTA update, the unit will send out the following MQTT message:

topic : otacomplete
payload: [the ID of the unit]

Typical serial on-demand debug output at the time of writing – for a test unit with ID “freddy” - with passwords changed to protect the innocent:

Time: 09:07:05 11/08/2016
Time Code: 1470906425
Dusk: 21:08 Dawn: 07:22
On1: 08:00 Off1: 12:00 On2: 15:00 Off2: 23:00 Peak: 23c Off-peak: 19c Frost: 14c
IP: 192:168:1:25
Internal ID: ARPS_00A68508
ID: freddy
DESC: empty
FLAGS: 
SSID: wififorus (Active)  Pass: xxxxxxxx
SSID2: wififorus  Pass2: xxxxxxxxx
MQTT Host: 192.168.1.19 Port: 1883 User: admin
OTA Host: www.scargill.net  Port: 80
Code Version: 1.5.61
SDK Version: 2.0.0(656edbf)
RSSI: -48
Out0: 0
Out4: 0
Out5: 1
Out12: 0
Out15: 0
Out16: 0
Sensor Type: DHT22
Temperature Port: GPIO2
GPIO13 available for general use: No
GPIO2 is an input
Sonoff setting=0
WiFi button=2
Invert settings=HEX( 1)
Serial2 settings=0
RGB Indicator=1
Electrodragon=0
No LED clock
CPU frequency: 80Mhz
Free Heap: 16680 bytes
Up Time: 0:05:04

Facebooktwittergoogle_pluspinterestlinkedin