ESP8266 SDK 1.11

Just a short one for those of you who’ve not tried the new Espressif SDK update yet (SDK 1.11).  I noted a pair of commands “system_param_load” and “system_param_save_with_protect” which appear to replace the need for the load and save functions that TuanPM uses in his code in /mqtt/config.c  – so…

Read More

ESP8266 Test Board

I mentioned that Espressif were kind enough to send me a test board to play with – and very nice too. Not had time yet as I’m struggling with learning how to make an installer for my Node-Red package – with some great help from the guys involved with this….…

Read More

Presents from Espressif

Let me start by explaining that Espressif are makers of fine WIFI gadgets.. specifically they have spawned a whole new lease of life for IOT… by producing a marvellous little chip that contains a complete processor, memory and WIFI interface needing only a tiny FLASH memory chip and a couple…

Read More

Making ESP8266 Programming Easier

Updated 09 Apr 2015 – code fix: A little something here from my guest writer and friend Aidan who’s been working with me on the latest home control successes to follow after this blog! If you’ve successfully written and uploaded a piece of C code for the ESP8266 in any…

Read More

An ESP8266 for Arduino Game Changer?

(updated 2/4/2015) Here we go again – just as you thought it was safe to start coding, another game-changer comes along. This time not only do we have an Arduino IDE for the ESP8266 (which isn’t a stunningly good IDE but it’s awfully familiar to many developers) but also what…

Read More

ESP8266 and MQTT Exciting Times

I don’t want to jump in prematurely here but those of you who have been reading the blog will know that I’ve had no end of problems with the MQTT stand-alone software on the ESP8266, but as each problem has emerged, the author (Minh Tuan) has been keeping in touch…

Read More

The ESP8266 Grand Master Plan

So… here’s where I’m up to with my little project… currently stalled until we can figure out why the ESP8266 is not recovering from loss of WIFI. This is “the plan.  Using the basic MQTT code, I’ve added the ability to control GPIO0 and take input from say a Dallas…

Read More