Tag Archives: ESP-GO Update – ILI9340 Drivers

ESP-GO Update–the ILI9340 QD-TECH drivers

There’s a discussion going on in here about the M5 Stack and one of the guys says he wants to use ESP8266 – now then is possibly a good time to announce that I’ve been updating the code in ESP-GO for  the ILI9340 and QD-Tech displays. It is all in the doc file but here are some pics… An ESP-12 board plus cheap display..

ILI9340

Above the ILI9340 and below the smaller and lower res QD-Tech display board, both dirt cheap, in the example below, boxed up on the wall as a stat display…. I’ve added the option to re-purpose gpio4 and 5 in ESP-GO for a maximum of 3 auto responders on input state change (trigger2, trigger4 and trigger5) making a thermostat display with buttons a snap.

QD_TECH in a box, reversed out display

For the DIY-er on a budget, this is a very inexpensive solution. The display layout of course is not fixed, you can set up your frame, select fonts and update icons as you see fit in Node-Red or other high level environment. The QD_Tech board is lower res than the ILI9340 but I got a bunch of suitable boxes from Ebay for just £3 each some time ago.  The light you see is driven by one of those touch sensitive plates we discussed in the blog some time ago. In reality I will end up using 3 tiny buttons.

Facebooktwittergoogle_pluspinterestlinkedin