Tag Archives: Koogeek Smart Light Strip

Koogeek Smart Light Strip LS1

Koogeek lightWhile we were down at the coast paying a fleeting visit to Gibraltar, a package arrived for me from  www.koogeek.com – their LS1 Smart Light Strip – which is available from TomTop - https://www.tomtop.com/p-ls1-1.html

Here it is, it arrived well-packed – it is worth noting that apps are available for both Android and IOS. The box describes the product and spec in English, Chinese and what looks like German. For IOS users the strip works with Apple HomeKit. Somewhat less info is provided on the box for Android.

Koogeek light

At this point I got the urge to open the box and take a look. This time, there were instructions in several languages including French and Italian. The manual has in total three sides in English including specifications and safety warnings.

The strip is for indoor use only and the product includes a 60-LED, sealed, adhesive-backed strip (somewhat waterproof-looking) and inline controller with USB at the end – all in white. Control is over WiFi - 2.4G only.

I plugged the strip into a handy USB supply and with the one button on the controller, turned it on. Double-click doesn’t seem to do anything so at this point it looks like an on-off control only – giving a smooth fade into a satisfyingly bright white.

Koogeek light

On removing and re-applying USB power, the lights come up again in white, regardless of the last button state (on or off) so you could end up with a room full of lighting during the day in your absence – not a good thing. I think there may be an assumption here of the user always being present – and power always being on (i.e. no power cuts or brown-outs).

The light works with Google, Siri (Apple) and Alexa voice technologies none of which I had handy to test.

Rather too much Apple bias for me – and that shows in the Android Store who gave the app “Koogeek Smart Home” a rating of 1.7 – particularly low.

I downloaded the app onto my Android phone.

The unit comes with full colour control in the App and setup was particularly easy, however, again  if you get a power failure, when it reconnects, app settings are lost and worse, you have to be at the light strip to turn the power on otherwise the App has no idea of the state of the lights. As this is presumably all down to software I’m sure this can be sorted but right now at v2.2.14 it isn’t, which leaves the current strip as a novelty but little else.

Facebooktwittergoogle_pluspinterestlinkedin