Don’t get me wrong, we don’t yet have a fully working interpreter, but a link appeared on my ESP8266WIFI Facebook page thanks to Michael Molinari this morning and I thought I’d give it a whirl.
I grabbed the Windows loader (Windows 10 put up a SEVERE warning about this which I totally ignored), plugged an ESP-01 into my FTDI and blew in the interpreter, all of which took a couple of minutes and zero effort.
At first I didn’t know what to expect, I looked at the serial port – nothing.. then realised it outputs at 9600 baud, not my usual 115K…. I then started typing stuff into the serial – nothing – at which point I noted it already knew about my router – I can only assume that is because the WIFI passwords were already in the board, normally you’d have to use the board as an access point just to put in your WIFI details… anyway, I managed to bypass that.
I checked the examples on the page – hello world and a graphics example – which worked right out of the box!! Imagine that – simple BASIC commands putting out graphics on a web browser from a twopenny WIFI board all on it’s own!!
At this point, things went down a little. I tried editing the code (in the web browser!!) and it wasn’t having a SAVE – I noted on the serial that it had crashed… but then if you look at the dates this is all very new.
Seriously this has to be worth a few minutes of your time – assuming the project continues and these niggles go away, you just don’t get a quicker, simpler and cheaper way to get a web page with buttons into an embedded device – even if just to do some simple stuff. This is now ENTIRELY down to how much effort the author puts into this.
Go take a look! These images should enlarge on click/touch. Well impressed IF development comes quickly enough….